Guide: How To Cut Different Materials Flooring Tiles?
|
|
Time to read 3 min
Introduction
When installing floor tiles, you will definitely cut the flooring tiles according to the area of the ground. Since floor tiles have a variety of different materials, the tools and methods required are also different. The following is a detailed description of the cutting methods based on different materials.
About Peel and Stick Vinyl flooring
The basic tool set includes:
- a ruler
- scissors
- utility knife or pen knife
- cutting mat
- you also need to prepare a pencil
Peel and Stick Vinyl flooring is the easiest flooring tile to cut because it is soft, easy to bend, and has a thickness is 2mm. After measuring the installation area, you will cut according to the paving pattern. Just lay the cutting mat under the product, measure the size with a ruler, mark with a pencil, scratch with a utility knife, break the vinyl floor tile by hand and finally cut the backing paper with scissors. You can also cut directly with scissors, but the lines may not be too straight.
About Interlocking Vinyl Floor Plank
Tools:
- utility knife
- ruler
- pencil
- cutting mat
Interlocking Vinyl Floor Plank has two interlocking methods: one is that the bottom layer is vinyl, and there are plastic clips around the floor tiles, like a puzzle, and the clips can be connected to each other to lock. The other is that the bottom layer is a stone plastic material, the area is larger than the color layer, and the edges are embedded in each other to interlock. The thickness of these two materials is 4~6mm, and the cutting method is relatively simple:
- Use a pencil and ruler to mark the cut area
- With the help of a ruler, use a utility knife to scratch the surface of the vinyl floor plank
- Break the floor tiles along the scratches by hand.
You can refer to the following video
About Engineered Hardwood Flooring Tiles
Tools:
- chalk or pencil
- saw blades such as table saws or hand saws
- rulers
- masks are also required
Engineered Hardwood Flooring is an alternative to solid wood flooring. Each board is made of artificial materials and covered with a layer of solid wood veneer. This type of floor tile is harder than vinyl flooring and cannot be cut with an ordinary utility knife. Use chalk or pencil to mark the scale on the engineered hardwood flooring and use a table saw to compare the scale for precise cutting. Wear a mask to avoid inhaling the fine chips generated during cutting.
photo from flooring365.co.uk →
Adhesive-Backed Carpet Tiles
Tools:
- Pencil
- Ruler
- Utility Knife
Adhesive-backed carpet tiles are made of Polyester, similar to blankets. Floor tiles of this material are generally square and relatively easy to cut.
1. Place the Carpet tiles in the area where they need to be installed, and mark the extra part with a pen
2. Use a ruler to compare the scale position, use a utility knife to scratch, and then fold it in half
3. After folding in half, there is still a layer that has not been cut. Keep the folded angle and cut it with a utility knife
In addition to the above types of flooring tiles, there are more types, such as ceramic floor tiles, solid wood floors, etc. The installation or maintenance of ceramic flooring tiles and solid wood floors is relatively cumbersome and complicated. For example, cutting ceramic flooring tiles requires an electric saw, and installation requires cement grouting. Solid wood floors are prone to mold and termites because they need to be maintained. Therefore, various substitutes will be derived later, among which peel and stick vinyl floor tile is a more popular product widely used in daily home renovation.
FAQ Section
What kind of tile is best for flooring?
For landlords, ceramic floor tiles are the best choice for cost-effectiveness and have a long service life of 10-20 years. For tenants, it is more appropriate to use easily removable floor tiles for short-term decoration of residential environment. Peel and stick vinyl flooring can be directly covered on ceramic floor tiles without damaging them, which is very suitable for DIY enthusiasts.
Is tile better than wood flooring?
Yes, tile floors are generally easier to clean and maintain. Hardwood floors easily show marks and stains, and are prone to mold and mildew in damp areas. Tile surfaces are resistant to stains and scratches, and will not mold or mildew. Therefore, tile floors are a practical choice for high-traffic areas or busy households that are prone to stains.
Are Peel and Stick Floor Tiles Worth It?
The Good: 5 Undeniable Pros of Peel and Stick Floor Tiles
1. Cost Savior: Big Style, Small Budget
2. DIY Magic: No Tools, No Problem
3. Renter’s BFF: Easy to Remove Without Damage
4. Waterproof Wins: Resists Moisture and Spills
5. Style Chameleon: On-Trend Looks Without the Commitment
Click here for more details
